|
|
|
|
|
|
 |
|
|
-
ENCEE CLEAN 52 is an emulsifiable
cleaner. ENCEE CLEAN 52 contains petroleum based solvents
emulsifiers, wetting agents, corrosion inhibitor and
bacteriacide.
-
ENCEE CLEAN 52 on mixing with
water forms a white milky emulsion which a long stability and
excellent cleaning power.
|
|
|
USAGE RECOMMENDATIONS |
|
ENCEE CLEAN 52 can
be used by “Dip”, “Spray” or “Wipe” methods. It should be added to
water with stirring. |
|
|
|
a) |
Dip Method |
|
| |
Dilution |
5 to 15% in water |
| |
Temperature |
30 to 50ºC |
| |
Dip Time |
2 to 10 minutes |
| |
Agitation |
preferable |
|
b) |
Spray Method |
|
| |
Dilution |
5 to 10% |
| |
Pressure |
10 to 12 psi |
| |
Time |
30 seconds to 1 minute |
|
c) |
Wipe Method |
To be used as such, without
dilution |
|
|
|
-
The oil or
grease removed will be partially emulsified by ENCEE CLEAN 52
and certain oils will float on the top of the cleaner bath.
-
The oil has
to be frequently skimmed by overflowing the solution, or
removed by absorbing the oil with an absorbent paper.
- If the oil
is not removed regularly, it will re-deposit on the components
which are subsequently treated.
|
|
|
CAUTION |
|
Do not operate
ENCEE PHOS 52 cleaner bath above 50ºC
as the solvents are highly volatile and inflammable. |
|
|
|
|
(The above information is given in
good faith, but is without warranty)
|
